CME WIDI-X8 User Manual Download Page 16

 

   

Explanation: 
       

The WIDI-X8 1 is set to route mode 1(MIDI 

Ù

 RF), and the WIDI-X8 2 is set to route 

mode 3(USB 

Ù

 MIDI). In this way, the WIDI-X8 2 works as a USB-MIDI interface. For 

the route a), please set the MIDI IN device to “USB Audio Device”, and the computer 
receives the MIDI data from MIDI IN. For the route b), please set the MIDI OUT device to 
“USB Audio Device”, and the computer sends the MIDI data to MIDI OUT of the WIDI-X8 
2. The MIDI OUT data from WIDI X8 2 will also be send via RF to WIDI-X8 1.   

 

3.4  Removal of the product 

Please follow the below steps to remove the WIDI-X8 from your system after using it:   

 

1

For the MIDI connection, you can directly unplug the MIDI cable from the  

WIDI-X8. 

 

2

For the USB connection, please follow the below steps:   

z

 Close your music software that accesses WIDI-X8.   

z

  Find “USB Audio Device” in the Windows Device Manager, stop or uninstall it.   

z

  Now you can unplug the USB cable from the WIDI-X8. 

 

4 Automation 

4.1  Automatic communication establishing   

z

  Automatic communication establishing when switched on 

When the frequency setting mode is set to automatic, the WIDI-X8 will automatically 

search for available radio channel and establish communication after switched on. 

When the frequency setting mode is set to manual, the WIDI-X8 will automatically 

establish communication. The green indicator will be on to show a successful 

communication establishing.   

z

 Automatic communication establishing after radio channel changed   

Either in the automatic or manual frequency setting mode, when the radio channel is 

changed, the WIDI-X8 will automatically establish communication. The green indicator 

will be on to show a successful communication establishing.   

z

 Automatic communication establishing for the one-to-multi function 

When you use the one-to-multi function to find and switch to devices or return to the 

 16

Summary of Contents for WIDI-X8





















Reviews: