
To use the automatic frequency setting function, make sure both the two
WIDI-X8s in the pair are in the automatic frequency setting mode.
One-to-multi communication (auto finding and switching)
The one-to-multi function is also regards as the auto finding and switching function.
When you have two WIDI-X8s in different radio channels, you can use this function to find
another one and establish communication conveniently.
(
1
)
Using the one-to-multi function in the manual frequency setting mode
Set all the WIDI-X8s to the manual frequency setting mode, and regards one WIDI-X8 as
the master, and the other ones as the slaves, and all the slaves using different radio
channels. Press the frequency set button in the master unit, and the master unit will
search for a free slave unit and establish communication with it. Repeat the operation to
switch among all the slave units for one-to-multi communication. To return to the original
frequency in the master unit, press and hold the frequency set button in the master unit
for about 3 seconds.
(
2
)
Using the one-to-multi function in the automatic frequency setting mode
Set all the WIDI-X8s to the automatic frequency setting mode, and regards one
WIDI-X8 as the master, and the other ones as the slaves. Press the frequency set button in
the master unit, and the master unit will search for a free slave unit and establish
communication with it. Repeat the operation to switch among all the slave units for
one-to-multi communication. If you press and hold the frequency set button in the master
unit for about 3 seconds, it will work as the automatic frequency setting function..
To disable the one-to-multi function, set the power switch to “LOCK”.
Important:
In this section, “free” means the WIDI-X8 has not established any
communication with any other WIDI-X8.
Even several WIDI-X8s are in different frequency setting mode, you can still use
the one-to-multi(auto finding and switching) function.
The WIDI system supports up to 32 pairs of WIDI-X8 used at the same place. If
you use many pairs of WIDI-X8s at the same place, please set the radio channels
within 1-32, that is, DIP3 is always set to position “0”.
14