CMC SUP15, Manual

Page: 56 / 77

MAN. 161 rev. 5 Use and maintenance manual Sup15
56ª
page of
77
8.10 Safety rules during maintenance
THE NON OBSERVANCE OF ONE OF THE FOLLOWING
SAFETY RULES CAN SERIOUSLY HARM PEOPLE OR CAUSE
SEVERE DAMAGES TO THINGS OR PARTS OF THE EQUIPMENT OR
OF THE VEHICLE.
•
To assure the safety of the machine the use of original spare
parts installed by CMC or by authorized repair shops
is compul-
sory: in fact some components can be calibrated only in CMC or in
authorized workshops.
•
It is forbidden to do maintenance operations when the
MEWP is moving : make sure that the parts to maintain are abso-
lutely motionless and do these operations with the motor of the
chassis stalled, taking the keys away from the panel;
•
Perform the maintenance operations in a sufficiently large space
and suited to the sizes of the truck: Mark the area assigned for the
maintenance operations by suited enclosure or by a red/white band
ribbon and do not allow entrance to unauthorized staff.
•
Do not modify or remove safety devices.
•
Do not modify calibrated pieces
•
During the washing operation, do not lead the water jet directly
on the electrical panels of the MEWP and do not use cleansing, ag-
gressive chemicals dangerous for the components of the MEWP
(rubber parts, painted parts, etc.).
•
It is forbidden to perform any intervention on parts of the
MEWP, such as welding, piercing , and so on, without prior written
authorization by CMC.
•
Wear appropriate accident-prevention clothes (clothes, gloves,
goggles, etc).
•
During maintenance operations, be careful not to damage the
hydraulic circuit and avoid impurities to enter the circuit.
•
Before any maintenance operation that involves the disassembly
of hydraulic circuit parts, make sure that the system is not under
pressure. This, in order to avoid violent emissions of oil: moving all
the truck motor stalled, no component shall move