CMA Dishmachines UC65e M3, Installation & Operation Manual

Page: 7 / 27

Installation
The installation of the dishwasher must comply with all local electrical, plumbing, health, and
safety codes or in the absence of local codes, installed in accordance with the applicable require-
ments in the National Electrical Code, NFPA 70, Canadian Electrical Code (CEC), Part 1, CSA
C22.1; and the Standard for Ventilation Control and Fire Protection of Commercial Cooking
Operations, NFPA 96.
Installation Codes
NOTE:
The installation of your dishwasher must be performed by qualified service personnel
familiar with food service equipment and must comply with all local health codes.
Problems due to improper installation are not covered by the Limited Warranty.
STOP STOP
ALL PLUMBING CONNECTIONS MUST BE MADE BEFORE THE ELECTRICAL INSTALLATION.
DAMAGE TO THE WATER HEATERS WILL OCCUR IF POWER IS TURNED ON WITHOUT AN
ADEQUATE WATER SUPPLY.
DAMAGE DUE TO IMPROPER INSTALLATION IS NOT
COVERED BY THE LIMITED WARRANTY.
2