CMA Dishmachines UC65e M3, Installation & Operation Manual

Page: 15 / 27

10
Parameter Setting Instructions
(PARAMETER BUTTONS ON BOARD)
Skip
Select Menu
WASH TEMPERATURE
ADJUSTMENT
PRESS BUTTON TO CYCLE
THROUGH AVAILABLE
VALUES
152
1. DETERGENT CONCENTRATION
2. RINSE TEMP
3. WASH TEMP
4. FILL TIME
5. UNITS (F-C)
6. LANGUAGE (English - French)
(LCD SCREEN)
PARAMETER SETTINGS (continued)
To Change Parameters:
1. Push and Hold the “Menu” button.
3. Push menu button to scroll through until desired parameter is reached.
4. Push “CHANGE” button until desired setting is reached.
5. Release and control will return to normal operation (approximately 3 seconds).
Menu Button
push and hold for
menu, then scroll
parameter.
Change
Parameters.
SKIP advances
to the next portion
of a cycle.
0514058 REV A -30-MAR-2021
PARAMETER SETTINGS INSTRUCTIONS
Locate control board shown below:
BOARD SETTINGS
ARE ACCESSED
FROM REAR OF
CONTROL PANEL .
!
Displace control
panel safely and
securely
.
DO NOT PULL .
Unscrew two
fasteners after
opening door.
Open door.
CAUTION: Parameter changes must be made
by qualified personnel only.
!
wait in cycle
The following parameters may be changed
depending on model:
Viewed from the back of the machine
(Back of the board shown below)