Assembly Instruction
Step 1
1. Fasten front stabilizer (2) and rear stabilizers (3) each
with 2 carriage bolts (21) from the underside of
stabilizers. Sesure with 2 washers (23) & domed
nuts (22) to main frame (1).
Step 2
2. Screw pedal (26) onto the crank arm set (39). The
pedals are marked with R and L at the screw. Tighten
the left pedal counter-clockwise, the right pedal
clockwise.
Step 3
1. Unscrew the pre-assembled 4 hex. Bolts (24) & 4
washers (25).
2. Connect the upper computer cable (18) with lower
computer cable (19) tightly.
3. Put the handlebar post (4) into the main frame (1).
Secure with 4 hex. Bolts (24) & 4 washers (25) tightly.
Step 4
1. Release round knob (11) and sleeve (14) from
fastener at handlebar post (4). Open up fastener and
place the handlebar (31) onto fastener.
2. Select the desired position for handlebar (31), fasten
the fastener by round knob (11) with sleeve (14)
securely.
GB
GB
GB
GB
GB
- 4 -
