Step 5
1. Plug the upper computer cable (18) to jack at back of
computer (20). Slide computer (20) to the bracket at
the top of handlebar post (4), secure with 4
screw (47) firmly.
2. Plug the hand pulse sensor wire (42) to jack at back
of computer (20).
Step 6
1. Attach right and left plastic computer holder (30) to
handlebar post (4) (under handlebar (31)). Secure
with 4 bolts (
52
) firmly.
Step 7
1. Attach saddle adjustable post (6) to saddle (7),
secure with 3 x washer (45) and 3x locknut (44).
2. Release the knob (10) from saddle post (5). Put
saddle adjustable post (6) into saddle post (5). Select
the desired position and fasten with knob (10).
Step 8
1. Loosen & pull the saddle post knob (13). Insert the
saddle post (5) to the main frame (1), choose the
desired position and tighten the Saddle post knob (13)
again.
2. Attach adaptor (49) to DC wire (48) at back of main
frame (1).
3. Ensure that the knob is always tightened.
GB
GB
GB
GB
- 5 -
