Controls and Indicators – Electric Vehicles
MAINTENANCE
Refer to pages 39 through 43 for Periodic Service and Lubrication Schedules.
See following NOTE.
NOTE:
If the vehicle is constantly hauling heavy loads, the preventive maintenance procedures should be performed
more often than recommended in the service and lubrication schedules.
CONTROLS AND INDICATORS – ELECTRIC VEHICLES
See General Warnings on page 12.
WARNING
• If renting or loaning the vehicle, make sure the driver is familiar with all controls and operating
procedures before allowing the vehicle to be driven.
• Do not shift the Forward/Reverse switch while the vehicle is moving. To avoid injury to an
unsuspecting passenger or damage to the vehicle, always bring the vehicle to a full stop before
shifting the Forward/Reverse switch.
• Release the accelerator pedal and then press the brake pedal firmly until the vehicle stops. To avoid
unintentionally starting or rolling the vehicle, set the park brake, place the Forward/Reverse switch in
the NEUTRAL position, turn the key switch to the OFF position, and remove the key when leaving
the vehicle.
KEY SWITCH
The key switch is mounted on the dash to the right of the steering column
(Figure 7)
. It has two positions, OFF and
ON, which are clearly labeled.
See following NOTE.
NOTE:
When the key is turned to the OFF position, the main vehicle systems are disabled. The key switch may be
used as an emergency stop.
The key can be removed only when the key switch is in the OFF position.
52
Figure 7
Key Switch
6
Figure 8
Forward/Reverse Rocker Switch
Page 18
Precedent Gold Standard Remanufactured Vehicle Owner’s Manual
Summary of Contents for 2 in 1 Series
