Please read all instructions carefully before installing this luminaire.
This wet-location cold cathode luminaire comes from the factory completely pre-assembled.
Some disassembly is required in order to wire the luminaire(s) to line voltage, and to install
the lamp(s). This luminaire must be installed by a licensed electrician. All wiring and installation
methods must be in compliance with the National Electric Code and all applicable local codes.
Model ECLS
Single lamp luminaire
ECLS Manual 6-08
c
2008 Cathode Lighting Systems
Cathode Lighting Systems Inc.
8020 Queenair Drive
Gaithersburg, MD 20879
Ph: (800) 551-5012
Fax: (301) 963-3050
Email: [email protected]
INSTALLATION MANUAL
Model ECLS
Exterior Wet Location Single-Lamp Cathode Light Strip
Suitable for outdoor wet locations
Opertating temperature range: 10 F to 100 F
E168380
Pat. 6,454,431
INDEX
Page 1: Receiving your shipment & removing the polycarbonate lens
Page 2: Mounting the luminaire
Page 3: Attaching conduit to the luminaire
Page 4: Installing luminaires end to end
Page 5: Wiring Diagram & Electrical Information
Page 6: Installing the Lamp & Reinstalling the Polycarbonate Lens
Page 7: System Checklist & Troubleshooting
