Clover TFT2284C, Instruction Manual, Page: 99 / 162

7. Setup
7-6.3. All Motion ON / OFF, Sensitivity and Velocity Setting
▫
Click the button in the RECORD menu and the ALL MOTION setup pop-up
window will be displayed as shown in
[Fig.7-57].
▫ By clicking the mouse, select the on the pop-up window (See
Fig.7-57
) to enable the system to start recording by motion detection for all the channels.
▫ By clicking the mouse, select the on the pop-up window (See
Fig.7-57
) to disable the system to start recording by motion detection for all the channels.
▫ By clicking the mouse, select the on the pop-up window
(See
Fig.7-57
) and choose one of the sensitivity among
LOW
,
1
,
2
,
3
and
HIGH
for all the
channels with the mouse’s wheel, and then click it to save.
▫
See section 6-8.1 through 6-8.5 on page 52 through 55 for more information related to
recording.
[Fig.7-56 All Motion Setup button]
[Fig.7-57 All Motion Setup pop-up window]
[Fig.7-58 All Motion Sensitivity setup button]
99