Clover TFT2284C, Instruction Manual, Page: 115 / 162

7. Setup
7-7. NETWORK
▫ Click the “NETWORK” button in the SETUP menu and the NETWORK menu will be
displayed on the screen as shown in
[Fig.7-92]
.
▫
Click the (EXIT) button to return to the SETUP menu.
[Fig.7-92 NETWORK menu]
7-7.1. IP Mode
▫ There are two kinds of IP MODE, “DYNAMIC IP” and “STATIC-IP” in the NETWORK menu.
DYNAMIC IP
: automatically receives IP address from the router or gateway. With Dynamic IP,
It doesn’t need to enter the GATEWAY ADDRESS, SUBNET MASK, and IP ADDRESS.
STATIC IP
: requires you to enter the GATEWAY ADDRESS, SUBNET MASK, and IP
ADDRESS.
▫
Click the
“IP MODE” button in the NETWORK menu and the IP mode
pop-up window will be
displayed on the screen (See
Fig.7-94
).
▫
Select the STATIC or DYNAMIC by clicking the mouse, pressing the buttons on the remote
controller depends on your networking.
115