Clover TFT2284C Instruction Manual Download Page 23

Page: 23 / 162

5. Installation

5-2. Note for Installation

Install the system according to the instructions described in this manual.

The 22” LCD monitor built-in 8Ch DVR and 2pcs of Indoor Cameras are designed for indoor

use and should not be used outdoors.

Avoid any area with high humidity or dust which can shorten lifetime of the system.

Choose a well ventilated area and keep minimum of 10” away from obstructions. Do not

place the system near heat generating devices.

Avoid any area with movement as this can interfere with the internal Hard Drive.

Use a compatible input/output signal type of cameras and monitor.

Contact your dealer if you have any problems in regards to the installation of this system.

The Warranty may be voided in case of unauthorized disassembling, abuse or modification.

Summary of Contents for TFT2284C


































































































































































Search results

Summary of Contents for TFT2284C

Reviews:

Clover TFT2284C, Instruction Manual, Page: 23 / 162

Search results

Summary of Contents for TFT2284C

Reviews: