Clover TFT2284C Instruction Manual Download Page 12

Page: 12 / 162

System Instruction Manual

22” Wide LCD Panel Built-in 8 Ch Digital Video Recorder

TFT2284C/TFT2288C

is the most reliable and functional embedded DVR system available today.

The system displays 8 channels of live images in Real Time speed, compresses data digitally

and records them to the Hard Disk Drive, which can be replayed and searched easily any time.

The

TFT2284C/TFT2288C

supports easy back up via USB port, external Hard Disk Drive and

networking in both static & dynamic IP modes.

User can remotely view live images or search the recorded images.

Under emergency situation, the remote operator can control, turn on and turn off the field

installed alarms, such as a siren or light.

It is a very user- friendly DVR system. User can control the

TFT2284C/TFT2288C

by Mouse or

Buttons on the front panel or Remote controller.

Summary of Contents for TFT2284C


































































































































































Search results

Summary of Contents for TFT2284C

Reviews:

Clover TFT2284C, Instruction Manual, Page: 12 / 162

Search results

Summary of Contents for TFT2284C

Reviews: