select “settings”
> "senior" > “configuration”, set up the IP address in “Network port settings” when
“configuration” dialog pops up.
Note:
The IP address of the reader can’t be repeated. Use the Ping command to test whether the network
is connected on PC.
Image 4-4 Settings of reader
4.5.1.3 RS485 communication connection
Select the communication mode in the "connect to the reader" option "485 connection (serial port)",
"connect parameter" select "COM?" (select PC serial number), communication rate select "115200", enter the
RS485 address, then click OK, as shown in image 4-10.
Image 4-10 485 communication connection
RS485 address defaults to 1
RS485 address range 1~255