3. Installation instructions
3.1 Notes
To ensure the normal and stable operation of the device and your personal property and safety, please
carefully read the following notes before install CL7206C reader and writer:
1. Firstly, check whether the power socket is connected to the ground, and to see whether the local power
supply voltage is in accordance with the applicable voltage range of the reader;
2. Check the device and the external connection if is closely connected;
3. Pay attention to the type selection and the length limit of the cable and the serial line:
Cable connect directly, no longer than 80 meters
Serial line connect directly, no longer than 10 meters
4. When installing several readers, the antenna position and the antenna spacing should be appropriate to
avoid interference with each other.
3.2 Installation conditions
Before installing the reader, please carefully check if the product is in good condition, the accessories are
complete or not, if there is any damage, please contact the supplier.
3.3 Device connection
3.3.1 Connect power adapter
Insert the power cord into the AC power supply socket and plug another end into the power connector of
the device and tighten.
Turn on and wait about 20 seconds, the system initialization process is completed and is standby state.
3.3.2 Connect external antenna and RF cable
The device built with four TNC coaxial cable connector for connecting an external antenna, select low
consumption RF cable, connectors should be tightened (Ensure to be waterproof when install outdoors);