ClosetMaid MAXIMUM LOAD 34380 Installation Instructions Manual Download

Page: 1 / 15

Primary Configuration Kit Capacity

4380 & 34380

11/19

01-10146-00

6 FT - 10 FT ADJUSTABLE GARAGE ORGANIZER

INSTALLATION INSTRUCTIONS

What you will need:

Maximum Shelving Load*: 100 lbs/ft
Maximum 40 in. Hang Track Load*: 700 lbs
Maximum System Load*: 1,400 lbs

(See pages 6)

•  Please read all instructions carefully.
•  Familiarize yourself with all parts (see “PARTS INCLUDED WITH KIT”) and check quantities.
•  Follow all safety precautions (see “SAFETY PRECAUTIONS”).

• Follow all manufacturer installation requirements in order to comply with the

advertised weight load specifications.

BEFORE BEGINNING

Primary Configuration

*Static Load Evenly Distributed. Must be installed per manufacturers

specifications or weight load capacity does not apply.

Whichever load reaches

capacity first:

Summary of Contents for MAXIMUM LOAD 34380
















Search results

Summary of Contents for MAXIMUM LOAD 34380

Reviews:

Related manuals for MAXIMUM LOAD 34380

Brands by name

Popular brands

ClosetMaid MAXIMUM LOAD 34380, Installation Instructions Manual

Search results

Summary of Contents for MAXIMUM LOAD 34380

Reviews:

Related manuals for MAXIMUM LOAD 34380

Brands by name

Popular brands