•
Use four supplied self-tapping screws to secure the mounting plate on the
wall.
•
Route the cables through the cable hole of the mounting plate and bracket,
and connect to the wiring terminals.
•
Plug the wiring terminals into the device and use four supplied M5 screws to
secure the bracket on the device.
•
Align the device with the mounting plate and buckle them together, and use
two supplied M3 screws to secure the device on the mounting plate.
•
Adjust the tilt angle of the device according to your actual needs.
•
Height And Angle
Summary of Contents for SmartHub-FT
Page 1: ......
Page 8: ...Cable Connection ...
