ClockedIn SmartHub-FT, Installation Manual

Page: 6 / 11

2.2
Precautions for Use
Temperature detection distance:
•
The best distance for temperature measurement: between 0.5-0.7m with
highest accuracy. The accuracy decreases if the temperature detection
distance out of this range.
Body temperature detection:
•
To ensure the accuracy of temperature detection, temperature detection
must be performed on the forehead.
Matters needing attention for temperature detection:
•
Temperature measuring equipment should be installed in a room with no
ventilation. Room temperature should between 10
℃ to 35 ℃ .
•
The device should be pre-started and warm up for 10 minutes, until the
sensor temperature and ambient temperature are balanced.
•
When measuring temperature, the forehead should be directly facing the
temperature measuring area to ensure the measuring accuracy.
•
During temperature measurement, do not move the forehead position, to
avoid temperature change caused by forehead position change.
•
Make sure there is no cover on the forehead (hat, hair) and no sweat on the
forehead when doing temperature measure.
•
Don’t cover your forehead with cold water or warm water before
measurement.
•
When measuring temperature, avoid temporarily putting down or taking off
your mask or glasses, to avoid temperature sudden change. Under these
circumstances, please measure the temperature 30 minutes later: after
drinking hot water, meals, naps, and exercise.
•
Exposure to certain factors, such as showers, hair dryers and sprays, can
change the temperature of the forehead.
•
The temperature measurement accuracy will be affected when people enter
the room from the cold outdoor environment. Please measure again in about
10mins after the body temperature return to normal.
2.3
Wall Mounted
•
Drill holes on the wall or other surface according to the mounting plate.