Page 28 of 35
V1.4 2019-09
11.3
VERSION (Version)
Definition
The VERSION command returns the current version of the Host firmware. The
command has no parameters.
The VERSION command only returns the version of the Host MCU firmware. For
the version of the Ultimo (Dante) firmware the Dante Controller application shall
be used.
Syntax
VERSION <CR>
PARAM 1
This parameter is not required. Carriage return shall follow immediately after
the Command.
PARAM 2
This parameter is not required.
Example(s)
To request firmware version
Ex 1: VERSION<CR>
Device
response(s)
The following response shall be received from the device
Res 1: ACK VERSION x.y<CR>
Where “x” indicates the major version number and “y” the minor version
number of the Host’s MCU firmware
11.4
DEFAULTS (Defaults)
Definition
The DEFAULTS command sets TIM-1000 to a known default state on all settings
(see section on Factory Configuration).
Syntax
DEFAULTS <CR>
PARAM 1
This parameter is not required. Carriage return shall follow immediately after
the Command.
PARAM 2
This parameter is not required.
Example(s)
To request firmware version
Ex 1: DEFAULTS<CR>
Device
response(s)
The following response shall be received from the device
Res 1: ACK DEFAULTS<CR>
Summary of Contents for TIM-1000
Page 1: ...User Guide TIM 1000 Tracking Intelligent Microphone...
Page 2: ......
Page 4: ...Page ii of vi V1 4 2019 09...
Page 44: ......
