16
5.2.1 General advice for the cutting
•
Make sure you have filled the water and the fuel tank. No petrol is supplied with the machine.
•
The engine is shipped with oil. Check oil level before starting. Top up if required.
•
Material weighing up to 100 kg and having dimensions smaller than 720x800x370mm can be
cut with the Jumbo 1000 P13.
•
Before commencing work make sure the diamond blade is firmly seated!
•
Select the right diamond blade as recommended by the manufacturer depending on the
material to be worked, the working procedure (wet cut) to be carried out and the required
efficiency.
•
Apply cooling water continuously whilst cutting and in good time!
•
When cutting work is finished, close the water-tap so you can remove the cut pieces from the
cutting table without getting wet.
Summary of Contents for Jumbo 1000 P13
Page 1: ...Jumbo 1000 P13 OPERATING INSTRUCTIONS ...
Page 2: ...2 ...
Page 4: ...4 ...
Page 23: ...23 ...
