Clipcomm CG-410 Page 32 User Manual Download

Page: 32 / 35

8. Upgrading the Firmware

You can easily upgrade your CG-410 firmware by updating the new version of firmware through the

network or a serial interface.

8.1. Upgrading the Firmware by FTP

When your CG-410 is connected to the network and it is accessible by its IP address, you can

upgrade its firmware by FTP, the fastest way to upgrade. However, FTP cannot be used when your

CG-410 is in an abnormal state or when it is not connected to the network.

The following example shows how a command line FTP client is used to upload a new firmware (“CG-

410.fls”) to the CG-410. Its IP address is 192.168.0.36. Enter “admin” as the user name and type in

the password that is set in the VoIP configuration web page of the CG-410. The default password is

“0000.”

The system will reboot automatically when upgrading the firmware by FTP is completed.

C:\> ftp 192.168.0.36

Connected to 192.168.0.36.

220 Precise/RTCS FTP Ready

User (192.168.0.36:(none)): admin

331 Password required for admin

Password:

Type a password (4-digit number).

230 Logged in

ftp> bin

200 Type OK

ftp> put CG-410.fls flash

200 Port command okay

150 Opening data connection for STOR (192.168.0.14,1161)

226 File received OK – 1053136 bytes in 10.640 sec

ftp: 1053136 bytes sent in 10.55Seconds 99.82Kbytes/sec.

Chapter 8

Summary of Contents for CG-410




































Search results

Summary of Contents for CG-410

Reviews:

Related manuals for CG-410

Brands by name

Popular brands

Clipcomm CG-410, User Manual

Search results

Summary of Contents for CG-410

Reviews:

Related manuals for CG-410

Brands by name

Popular brands