20
Gatekeeper
Password
Enter the password of the gatekeeper if you need the H.235
authentication to register.
N/A
Skip GRQ
Use this item to send RRQ ahead and skip GRQ to register with
the gatekeeper.
disable
Enable H.323
ID
Once enabled, CG-410 uses the H.323 ID as one of its aliases
to register with the gatekeeper.
disable
H.323 ID
Set the H.323 ID in this tab.
Clip
Enable E.164
ID
Once enabled, CG-410 uses the E.164 ID as one of its aliases
to register with the gatekeeper.
disable
E.164 ID
Set the E.164 ID in this tab.
100
Refer to the following table for the remaining items not mentioned above. If you are not familiar with
the items below, it is suggested that you do not change the settings.
Item
Description
Default
Fast Start
Once enabled, CG-410 uses fast start procedure for
outgoing calls.
enable
H245 Tunneling
Once enabled, CG-410 uses H.245 tunneling
procedure
.
enable
Use VAD
Once enabled, CG-410 continuously monitors voice activity
and does not send voice data when it detects silence.
disable
Comfort Noise
Generation
Once enabled, and the sender uses VAD, a comfortable
noise is generated when the sender remains silent.
enable
Debug Print Level
Determines the debugging information level which is printed
through the COM port.
1
RTP Port Base
Sets the base port number of RTP which is used on H.323.
5000
Q.931 Port
Configuration
Q.931 port number can be set manually by this
configuration parameter.
Automatically
RAS Port
Configuration
RAS port number can be set manually by this configuration
parameter.
Automatically
H.245 Port
H.245 port number can be set manually by this Automatically
