21
Configuration
configuration parameter.
Use NAT
Traversal
If you are using a private IP (behind NAT) and want to use
NAT traversal to make or receive an external call through
NAT, set "Use NAT Traversal" enable.
Otherwise, make it disable.
disable
NAT Router IP
Enter the external IP address of the NAT Router to use NAT
traversal.
N/A
To use NAT Traversal, open a unique set of H.323 signaling (Q.931, RAS, etc) and RTP port/address
pairs at NAT router. This process will enable your CG-410 to make and receive calls through NAT.
Setting up these ports is called Port mapping, which enables your CG-410 to run behind the NAT
router.
6.3.2. Configuring the CG-410 for SIP
①
Select [System Configuration] on the left side, and then choose [SIP] to enter the SIP
configuration page.
②
Set each configuration parameters with appropriate value.
Refer to the following table about the details of each field.
Item
Description
SIP Server
Configures the URI of the SIP Server.
Register On
Enable it to register on the server.
Registrar Server Configures the URI of the Registrar Server.
Outbound Proxy Configures the URI of the SIP Proxy when Proxy is used.
Proxy Port
Configures the port of the Proxy server.
User ID
Determines the telephone number which is set as User information.
Display Name
Determines the name which is set as User information.
Authentication ID Determines the ID which is set as User information.
