manualshive.com logo in svg

Clinton FL-20A, Instruction Manual

Share
Download
Clinton FL-20A Instruction Manual Download Page 51

FL-20A Instruction Manual - Page 43

Model FL-20A Cable Fault Locator

reduce the risk of electric shock to an acceptable level. The 

choices should be appropriate, feasible and consistent with 

today’s technology.

 

The National Electrical Code contains requirements for 

the installation of electrical products, but product safety 

standards cover the details and complexities of the design 

and construction of the various products, including which 

protective mechanisms or combinations of protective mech-

anisms are considered satisfactory to meet the need for pro-

tection against electric shock.

  Manufacturers of electric vehicles, charging ports and 

associated equipment need to consider this information as 

they design the electric cars of the future. If the new vehi-

cle designs include the appropriate protection equipment 

to prevent potentially dangerous physiological effects, then 

electric vehicles will provide a modern, safe and environ-

mentally friendly mode of transportation.

Interlocks and 

“Smart” Circuits

Summary of Contents for FL-20A






















































Reviews:

No comments

Brands by name

Popular brands

Load more brands