UNPACKING & SETUP
All Clinton Bariatric Open Base Power Tables ship fully assembled. However, care should be taken when unpack-
ing the table so as not to damage the equipment.
BEFORE STARTING TO UNPACK THE EQUIPMENT inspect the boxes for damage that may have occurred during
the shipping process. Clinton uses every packaging option available to insure that equipment arrives at its
destination in factory condition, however, Clinton Industries has no control over third party handling once it
leaves our facilities. Report any visible damage to Clinton and the shipping carrier immediately.
After the package is inspected for visible damage, follow the unpacking steps below.
CAUTION:
Do not use a knife or other sharp object that may puncture or damage the upholstery
during the unpacking process.
CAUTION:
Clinton Open Base Power Tables are heavy. Clinton Industries recommends four
reasonably strong individuals using proper lifting techniques be used to lift or move the table.
Not using the recommended number of movers may result in injury to the persons attempting to lift
or move the equipment.
CAUTION:
Always lift the table by the metal frame. If table is equipped with stirrups, never used the
extended stirrups for lifting the table. This could result in damage to the stirrups or table, and may result in injury
to the individuals attempting to move or lift the table.
1
2
4
5
UNPACKING THE POWER TABLE
1. Remove any strapping and
cardboard lid
2. Remove wooden post supports
from each corner.
3. With help, lift main cardboard
surround off the table.
4. Pull corners of cardboard tray
apart so tray is flat.
5. With the assistance of one or
more persons, lift power table
off skid and into position.
3