- 5 -
1. Content of package
Please make sure that the following content are included in the package:
1. BT-H1503/1506 Digital Media Player Main unit
2. Power supply
3. BT-H1503/1506 User Manual
2. Before you start
Before you can use your internet radio, you need the following:
•
A broadband LAN internet connection.
•
A wireless access point connected to your broadband internet. Via a router is
recommended.
•
If your wireless network is configures to use WEP (Wired Equivalent Privacy) or
WPA (Wi-Fi Protected Access) data encryption, it is important that you know your
WEP or WPA code to connect to your network.
Depending on your wireless router the internet radio should work anywhere within up to
20-30 meters of the wireless access point.
Before continuing, make sure that your wireless access point is turned on and connected
to your broadband internet(LAN). Please refer to your wireless access point manual to get
this part working.
3. Overview of your BT-H1503/1506
After taking your BT-H1503/1506 out of the package, please spend some time to
familiarize yourself with its features.
3.1 Front Panel
- 6 -
VOL = By Turning VOL knob Volume level is set. By Pressing VOL knob MUTE is
activated/deactivated.
TUNE = By turning TUNE knob users can navigate through menus. By pressing TUNE
knob user confirms choice.
MENU = By pressing MENU the CONTEXT Menu of the current mode is displayed.
INFO = Displays the different INFO in current mode.
SHIFT = By pressing SHIFT preset buttons will change from 1-4 to 5-8. F.ex. pressing shift
and then long pressing PRESET 2 will save PRESET on preset 6.
= Pressing ARROW left will navigate back in the menus.
= Pressing ARROW right will navigate forward in the menus.
SOURCE = By pressing SOURCE the BT-H1503/1506 will change between the different
modes: Internet Radio, Music Player, DAB(BT-H1506 Only) & FM.
1 – 4 = Preset buttons for saving favourite stations (Internet Radio, DAB or FM for BT-
H1506)
POWER = Turns BT-H1503/1506 on/off
EARPHONE = Earphone out
- 7 -
3.2 Back Panel
4. Turning on BT-H1503/1506
Preparing BT-H1503/1506 for operation:
1. Place BT-H1503/1506 on a flat surface.
2. If you are accessing the internet via wired Ethernet LAN, place BT-H1503/1506
near Ethernet LAN access and proceed to 6. Setting up the BT-H1503/1506
5. General menu navigation
To navigate to the different menus you must use the ARROW buttons on the front panel
and the TUNE knob. This is general for all menu items. Use ARROW keys to find the
menu you wish to select and turn the TUNE knob to navigate to the desired menu item.
Then press TUNE knob to select. When menu item is selected pressing right ARROW key
will also confirm selection.
F.ex. to navigate to the MAIN MENU while in INTERNET RADIO MODE press left
ARROW button and the Menu is showing on display. Turn the TUNE knob until MAIN
MENU is selected. Press TUNE knob to select MAIN MENU.
Pressing MENU on front panel will take you to the Context Menu of the present mode of
BT-H1503/1506 (Internet, DAB etc.)
BT-H1503/1506 has numerous features which require a small degree of setup before
users are able to fully use all the functionalities of the radio. The Main Menu
System
Setup menu has a series of options that allow system-wide settings to be altered.
Line Out
Power Input
Antenna
LAN
- 8 -
These settings are:
Setting
Action
Internet setup
Enter the Internet Settings submenu
Time setup
Enter the Time/Alarm setup submenu
Software upgrade
Enter the Software Upgrade wizard
Factory reset
Performs a factory reset
Please go to page 15 for System Menu (Step by Step).
6. Setting up the BT-H1503/1506 (Quick Guide)
The first time you want to connect to the internet to listen to radio stations, you will have to
set up the connection. This is done with the Internet Wizard. The radio has been
configured to automatically run the Internet Wizard when you enter the Internet Radio
mode (If a connection has not already been made).
Alternatively you can manually run the Internet Wizard if you want to connect to a different
Wi Fi network. This can be accessed from the System Setup
Internet Setup menu in the
MAIN MENU.
The Internet Setup menu consists of 4 options:
Wizard, PC Settings, View Settings and Manual Settings.
6.1 Wizard:
1. Select the Wizard.
2. The Wizard will then automatically scan for available Wireless or Wired (LAN
Ethernet) networks and a list is displayed.
3. Turn the TUNE knob to either select desired network (SSID) or select one of the
three other options. Rescan (Performs a rescan for networks), Wired (Optional)
(Will select Ethernet) or Manual Config (Will allow user to manually configure the
Wireless setup).
4. If the network has no security the following messages appears – “Please wait
Connecting”, “Please wait Acquiring address” and “Connected” The Internet Radio
menu will be displayed.
5. If the network has a security feature enabled the BT-H1503/1506 will prompt you to
enter the key or pass phrase. The security details must match the security
information configured in the wireless access point. The authentication type (WEP,
Open, WPA or WPA2) will automatically be detected.
6. Password Entry:
Turn the TUNE knob to display different sets of characters and numbers. Use the
ARROW buttons to move the flashing cursor to select the desired characters.
Mit FinePrint gedruckt - bitte bei www.context-gmbh.de registrieren.