AIR-CONDITIONERS
COMPACT and SPLIT QUATTRO models
page 18
www.climma.it
4.5 - ELECTRICAL CONNECTIONS
All electrical pumps are single-phase pumps. So they need
a connection to the neutral wire, to the phase and to the
grounding. Check always that the voltage on the label cor-
responds to the voltage available on board. Execute the
connection according to the diagram on the terminal board
cover. Follow the sequence of the phases for the pump
connection. Check that the rotation direction corresponds
to the instructions of the pump.
4.6 - SELF-PRIMING ELECTRICAL PUMP
If it is not possible to follow the directions at 3.2, it is ne-
cessary to install a self-priming electrical pump following
the same instructions for the connection of a centrifugal
pump. Before starting it, it is necessary to fill the electrical
pump tank to make it self-priming.
CAPACITOR
CONDENSATEUR
CONDENSATORE
W2
U2
U1
V1
L
GND
N
4 SEA WATER CIRCUIT
