CLIMET INSTRUMENTS CI-90A, Operator'S Manual

Page: 15 / 44

CI-90A User’s Manual
Page 9
1.6 Specifications
Sample Lid: Clear Anodized Aluminum with 333 0.0225” holes,
OR (depending on model ordered)
Passivated 316 Stainless steel with 333 0.0225” holes.
Autoclavable @ 134C for 20 minutes
Enclosure: 304L Stainless Steel
Sample flow rate: 100 liters per minute (0.10 cubic meter or 3.53 cubic feet per minute)
Flow rate control: Electronic, automatic closed loop
Battery: Replaceable 9.6 Volts, 7.6 Amp hour Nickel Metal Hydride
Battery operation time:
7.5 to 9 hours of continuous operation
Time to charge battery: 4.0 to 4.5 hours
Display: 4x20 character LCD
Printer:
Thermal Dot Matrix, prints on 5/8” tall by 2” wide thermal labels
Unit ID: User selectable; 6 characters long.
User ID: Up to 10 users; 9 characters long.
Security: Security to prevent settings changes, or aborting a sample in progress
Location ID: Up to 100, 15 characters long.
Input/Output: RS-232 9600 bps, 8-bit, 1 stop, no parity, no handshaking
Audible alarm: Built-in
Alarm limits:

10% deviation from 100 LPM flow rate.
Dimensions: H-W-D: 7.5 X 8.1 X 9.9 inches (19.0 X 20.6 X 25.1 cm)
Weight: 9.9 lb (4.5 Kg) with battery
Power: Auto switching: 100–240 VAC, 47/63 Hz
Operating range: 0–36º C, 10–90% RH, non-condensing
Calibration: Factory Prime Calibration of flow system accuracy.
Calibration frequency: Recommended every 12 months.