CM9088
Wireless Desktop Weather Station
21
Support Continued
Problem
Cause
Remedy
My weather tendency
is not showing any
change or is changing
too often.
The number in which
your barometric
pressure threshold is
set to is too low or too
high.
You will need to use these following steps.
You will need to set the
barometric pressure
threshold.
TO CHANGE THE BAROMETRIC PRESSURE THRESHOLD
I cannot reset my
Minimum and
Maximum values.
TO CHANGE THE BAROMETRIC PRESSURE THRESHOLD
1) Press and hold the Set button for at least 10
seconds.
2) Press the Set button to scroll through the
options until the relative pressure setting display
changes to a single number.
3) The pressure threshold is defaulted to 2hPa.
Check that this is what is displayed the range is
2-4hPa.
The lower the number, the less it will take to
detect a change in pressure.
The higher the number, the more pressure will
need to change to alter the weather tendency.
4) Use Min/Max and the + buttons to change
the barometric threshold.
1) Press the Min/Max button - once for
Maximum values and twice for Minimum. The
values will then start to flash.
2) Press the + button to scroll through the
values.
3) Press and hold the Set button for the value
you want to reset.
4) Repeat steps 2 & 3 for all values you want to
reset.
5) Leave your station and it will return to
normal mode.
