CM9088
Wireless Desktop Weather Station
5. Program Mode
The display console uses five keys for operation:
SET
,
ALARM
,
MIN/MAX
,
+
and
SNOOZE/LIGHT
.
There are also four program modes available: Quick Display Mode, Setting
Mode, Alarm Mode and Min/Max Mode.
The selected program mode can be exited at any time by either pressing the
SNOOZE/LIGHT
key, or simply pressing no keys and waiting for the 10-second
time-out to take effect.
5.1 Quick Display Mode:
While in Normal Mode, press the
SET
key to enter the Quick Display Mode, you
then have the following options:
1)
Switch between Outdoor Temperature/Dew point (pressing the
MIN/MAX
key or
+
key shifts the display between outdoor temperature and dew
point).
Press the
SET
key again to switch to the pressure setting:
2)
Switch between Absolute pressure / Relative pressure (pressing the
MIN/MAX
key of the
+
key shifts display between the absolute pressure and
relative pressure).
Press the
SET
key to accept the change and toggle between these settings
then either press
SNOOZE/LIGHT
or wait 10 seconds to exit this program
mode.
5.2 Setting Mode:
- Hold the
SET
key for 3 seconds while in normal mode to enter Setting
Mode
- Press the
SET
key to scroll through the following in sequence:
1)
DST (Daylight Savings Time) on/off
. The DST (ON or OFF) setting will begin
flashing. Press the
+
key to toggle between DST ON and DST OFF.
2)
Time Zone Setting
. Press the
SET
key again to adjust the Time Zone (TZ)
setting.
Press the
+
key or
MIN/MAX
key to adjust the time zone from -12 to 12, based
on the number of hours from Coordinated Universal Time, or Greenwich Mean
Time (GMT).
10
