CM9088
Wireless Desktop Weather Station
5.5 Alarm Mode Continued:
-
While In the High Alarm Mode, press the
SET
key to scroll through the
following alarm modes:
1.
Time alarm (hour/minute)
2.
Indoor humidity/high alarm
3.
Indoor temperature high alarm
4.
Outdoor humidity high alarm
5.
Outdoor temperature and dew point high alarm
6.
Pressure high alarm
-
In the Low Alarm mode press the
SET
key to scroll through the following
alarm modes:
1.
Time alarm (hour/minute)
2.
Indoor humidity low alarm
3.
Indoor temperature low alarm
4.
Outdoor humidity low alarm
5.
Outdoor temperature and dew point low alarm
6.
Pressure low alarm
-
When the desired alarm mode is selected, press the
+
key or
MIN/MAX
key change or toggle the alarm value. Holding the
+
key or
MIN/MAX
key for 3 seconds will change the figure in larger amounts. Press the
ALARM
key to then choose if the alarm is on or off (if the alarm is
enabled, the speaker icon on the LCD will be displayed to indicate this).
Press the
SET
key to confirm the setting and continue pressing the
SET
key to toggle through the remaining alarm modes until it returns to the
normal display mode.
-
Remember - you can press
SNOOZE/LIGHT
key or leave the keys alone
for 10 seconds at any time and the alarm mode will return to Normal
Mode.
Cancelling the Temperature Alarms
a.
When an alarm condition has been met, that particular alarm will
sound and flash for 120 seconds. At this point, simply press any key to
mute the alarm. If the alarm condition is activated again within 10
minutes, the alarm will not sound again but will continue to flash
until weather conditions have stabilized.
This feature will prevent repeated alarms sounding for the same value
being triggered in a short period of time.
b.
The alarm will then reactivate automatically once the value has fallen
below the set limit or if a new value is entered instead.
16
