CM9088
Wireless Desktop Weather Station
6. Support
20
Problem
Cause
Remedy
My stations clock is an
hour fast.
Your time zone is set to
default.
You will need to set the
time zone.
TO SET THE TIME ZONE
1) Press and hold the
SET
button for at least 10
seconds.
2) The time zone will be the first option.
3) When it is flashing 0, press the
MIN/MAX
button until it shows -1.
4) Leave your station for the changes to be set.
My sensor is not
transmitting to the
console.
• Too much distance
between the two parts.
• Interference from
other sources
(wireless radio,
speaker etc.).
• Loss of signal.
TO RESET THE WHOLE STATION
1) Place the console and sensor next to each
other and take all batteries out of both parts.
2) Leave the console overnight powered down
without batteries.
3) In the morning reinsert the batteries into
the sensor first then straight away place the
batteries into the console.
4) Wait a few minutes; you should then see the
readings show on both the console and sensor.
EVERY TIME THE SENSOR IS POWERED UP A
RANDOM SECURITY CODE IS TRANSMITTED AND
THIS CODE MUST SYNCRONIZE WITH THE
CONSOLE TO RECEIVE WEATHER DATA.
• Reduce the distance.
• Find a different
location for the
sensor or console
away from units with
the same frequency.
• Reset the whole unit.
There are a few causes:
