Climax SHARK FIN DEFENDER, Operating Manual, Page: 41 / 62

P/N 97475, Rev. 2 Page 29
6 STORAGE AND SHIPPING
IN THIS CHAPTER:
6.1 S
TORAGE
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -29
6.1.1 S
HORT
-
TERM STORAGE
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -29
6.1.2 L
ONG
-
TERM STORAGE
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -29
6.2 S
HIPPING
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -30
6.3 D
ECOMMISSIONING
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -30
6.1 S
TORAGE
Proper storage of the Clamshell guard hands-free kit will extend its usefulness and
prevent undue damage.
Before storing, do the following:
1. Clean the machine with solvent to remove grease, metal chips, and mois-
ture.
2. Drain all liquids from the pneumatic conditioning unit.
Store the Clamshell guard hands-free kit in its original shipping container. Keep all
packing materials for repackaging the machine.
6.1.1 Short-term storage
Do the following for short-term storage (three months or less):
1. Retract the tool head from the workpiece.
2. Remove the tooling.
3. Remove hoses.
4. Remove the guards and replace the original clamshell screws.
5. Remove the machine from the workpiece.
6. Clean the machine to remove dirt, grease, metal chips, and moisture.
7. Spray all unpainted surfaces with LPS-2 to prevent corrosion.
8. Store the Clamshell guard hands-free kit in its original shipping box.
6.1.2 Long-term storage
Do the following for long-term storage (longer than three months):
1. Follow the short-term storage instructions, but use LPS-3 instead of LPS-2.
2. Add a desiccant pouch to the shipping container. Replace according to
manufacturer instructions.
3. Store the shipping container in an environment out of direct sunlight with
temperature < 70ºF (21ºC) and humidity < 50%.