Climax SHARK FIN DEFENDER, Operating Manual, Page: 21 / 62

P/N 97475, Rev. 2 Page 9
2 OVERVIEW
IN THIS CHAPTER:
2.1 F
EATURES AND COMPONENTS
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 9
2.2 C
ONTROLS
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -10
2.1 F
EATURES AND COMPONENTS
The Defender™ is a plug-and-play accessory package that can be added to any
H&S Clamshell machine measuring from 4–86" (102–2,184 mm).
The easy on-and-off guards eliminate pinch points on the rotating equipment when
an operator must be within reach during normal operation.
The Defender™ features a remote pendant that allows the operator to activate and
deactivate the tripper mechanism up to 72" (1,829 mm) from the workpiece, so
that the operator may observe the machine operation while not risking contact with
rotating equipment. This is an important feature when operating in a restrictive
area such as ditches, confined areas, or overhead areas.
The remote tripper mechanism connects to a PCU with a CE-compliant emergency
stop. The system also includes a low-pressure drop-out function.
If power loss occurs, the machine cannot restart when power is restored without
operator action.