Climax SHARK FIN DEFENDER, Operating Manual, Page: 25 / 62

P/N 97475, Rev. 2 Page 13
3 3SETUP
IN THIS CHAPTER:
3.1 R
ECEIPT AND INSPECTION
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -13
3.2 M
ACHINE ASSEMBLY
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -13
3.3 C
ONNECTING THE
PCU - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -15
This section describes the setup and assembly procedures for the Defender™
Clamshell guard hands-free kit.
3.1 R
ECEIPT AND INSPECTION
Your CLIMAX product was inspected and tested prior to shipment, and packaged
for normal shipment conditions. CLIMAX does not guarantee the condition of
your machine upon delivery.
When you receive your CLIMAX product, perform the following receipt checks:
1. Inspect the shipping containers for damage.
2. Check the contents of the shipping containers against the included invoice
to make sure that all components have been shipped.
3. Inspect all components for damage.
Contact CLIMAX immediately to report damaged or missing components.
NOTICE
Keep the shipping container and all packing materials for future storage
and shipping of the machine.
The machine ships from CLIMAX with a heavy coating of LPS 3. The recom-
mended cleaner is LPS PreSolve Orange Degreaser. All parts must be cleaned
before use.
3.2 M
ACHINE ASSEMBLY
Before assembling the machine, follow the risk assessment checklist in Table 1-2
on page 5.
Do the following to assemble the Defender™, referring to Figure 2-1 on page 10
and Figure 2-2 on page 11:
1. Check that the clamshell is fully installed on the workpiece with the motor
and trippers installed.