Climax FF6300, Operating Manual

Page: 84 / 132

Page 68 FF6300 Operating Manual
F. Mount legs and jacking screws—Lubricate the mount legs and jacking screws
weekly during machine use and before storage, with Moly Grade Anti-Seize or
equivalent.
G. Leveling foot—Lubricate the leveling foot daily during machine use, with
AW32 or equivalent.
Recommended lubricants
CLIMAX recommends the lubricants listed in Table 5-2. Listed alongside the regular
lubricants are biodegradable alternatives. If these lubricants are not available in your
area, contact CLIMAX for alternatives. See Appendix C for MSDS information.
CAUTION
To avoid damage and premature machine wear and to protect your
warranty, use only recommended lubricants.
T
ABLE
5-2. R
ECOMMENDED LUBRICANTS
Application Area Lubricant
Biodegradable
Lubricant
Viscosity (cSt) Quantity
Daily
Dovetail and square-
ways
AW 32 hydraulic oil
CONOCO Ecoterra 32
or Castrol BioBar 32
32 @ 40 °C
6 @ 100 °C
As required
Unpainted surfaces LPS 2 N/A 38 @ 25 °C As required
Each Use
Hydraulic power unit
AWS-46 hydraulic oil
(summer) CONOCO Ecoterra 46
or Castrol BioBar 46
46 @ 40 °C
8 @ 100 °C
As required to fill
reservoir to
mid-sight glass level.
Replace oil every
two years.
*
AWS-32 hydraulic oil
(winter) CONOCO Ecoterra 32
or Castrol BioBar 32
32 @ 40 °C
6 @ 100 °C
Weekly
Pneumatic condi-
tioning unit
AW 32 hydraulic oil N/A
32 @ 40 °C
6 @ 100 °C
Refill oil lubricator
Leadscrew
Dry film graphite lubri-
cant
†
N/A N/A
Light coating applied
by hand
AW 32 hydraulic oil
CONOCO Ecoterra 32
or Castrol BioBar 32
32 @ 40 °C
6 @ 100 °C
Chuck jacking
screws
Moly Grade Anti-Seize N/A N/A 1 cc per screw
Yearly
Main body gear
drive
Mobil SHC 634 N/A 460 @ 40 °C As required