Climax BF-R, Operating Manual

Page: 37 / 68

P/N 102823, Rev. 0 Page 25
2. Slide the collets or wedges
into the inside diameter
(ID) of the flange to be
machined (see Figure 4-1).
3. Slide the machine into the
ID of the workpiece.
4. Press the gauge tightly
against the flange surface
and tighten it in place (see
Figure 4-2).
5. Expand the collet or wedge
in the flange ID by tighten-
ing the draw bolt clockwise.
T
ABLE
4-1. F
LANGE AND COLLET
/
WEDGE
IDENTIFICATION
Number Component
1 Flange to be machined
2 Collet/wedge of machine
T
ABLE
4-2. D
RAW BOLT WENCH LOCATION
IDENTIFICATION
Number Component
1 Flange face
2 Draw bolt wrench
3 Alignment gauge
COLLET / WEDGE
OF MACHINE
FLANGE TO BE
MACHINED
2
1
F
IGURE
4-1. F
LANGE AND COLLET
/
WEDGE
FLANGE
FACE
DRAW BOLT
WRENCH
ALIGNMENT
GAUGE
2
3
1
F
IGURE
4-2. D
RAW BOLT WENCH LOCATION