Climax BF-R, Operating Manual

Page: 31 / 68

P/N 102823, Rev. 0 Page 19
5. Rotate the collar 180
degrees (see Figure 3-3).
6. Position the alignment
guide on the collet/wedge
shaft so that there is enough
travel for the collet/wedges.
7. Lock the alignment gauge
onto the collet/wedge shaft
with the set screw on the
lock collar.
8. Remove the cotter pin from
the tip of the collet/wedge
draw rod (see Figure 3-4).
T
ABLE
3-3. C
OLLAR ROTATED AND SLOTS
OPPOSITE IDENTIFICATION
Number Component
1 Slots opposite each other
2 Set screw
SLOTS OPPOSITE
EACH OTHER
SET SCREW
2
1
F
IGURE
3-3. C
OLLAR ROTATED AND SLOTS OPPOSITE EACH
OTHER