16-Channel Mas ter Re mote Con trol Op era tion
To transmit either channel 1, 2, 3 or 4:
Press button 1, 2, 3 or 4. The LED indicator on the
remote control
will flash once every second: this indicates
level 1.
To transmit either channel 5, 6, 7 or 8:
Press the LevelShift button once. This shifts buttons
1–4 to level 2 (channels 5–8). Then press the desired button within the next 7 seconds. For
instance, to transmit channel 5, press the LevelShift button once, then press button 1. The
LED indicator on the remote control flashes twice, pauses, flashes twice, etc.: this indicates
level 2.
To transmit channel 9, 10, 11 or 12:
Press the LevelShift button twice. This shifts the buttons to level 3 (channels 9–12). Then press
the corresponding button within the next 7 seconds. For instance, to transmit channel 10, press the LevelShift button twice, then press
button 2. The LED on the remote control flashes three times, pauses, flashes three times, etc.: this indicates
level 3.
To transmit channel 13, 14, 15 or 16:
Press the LevelShift button three times. This shifts the buttons to level 4 (channels 13–16).
Then press the corresponding button within the next 7 seconds. For instance, to transmit channel 14 press the LevelShift button three
times, then press button 2. The LED on the remote control flashes four times, pauses, flashes four times, etc.: this indicates
level 4.
NOTE: One sec ond af ter you stop trans mit ting levels 2, 3 or 4 (chan nels 5–16), the re mote con trol
auto mati cally re turns to level 1 (chan nels 1–4).
Remote Control Channel Assignments
Chan nel #
Func tion
Chan nel #
Func tion
1
Arm/Disarm
9
Remote Valet
2*
Activate Auxilliary Output A
(usually remote trunk release)*
10
Proximity Sensor Override
3
Silent Arm/Disarm
11*
Manual Transmission enable/AutoStart
(IS4 required)
4
IntelliStart 4 Activation
12*
Unassigned*
5*
Parking Lot Highlight Activation*
13*
Unassigned*
6*
SmartWindows 4 Accessory*
14*
Unassigned*
7*
Activate Auxilliary Output B*
15
Adjust Sensitivity of Optional OmniSensor
8*
Activate Auxilliary Output C*
16
Adjust Sensitivity of Proximity Sensor
* These channels can be assigned to control other Clifford ACG 2 systems and accessories on multiple vehicles.
In tel liGuard 8000/299
9
Summary of Contents for IntelliGuard 8000
Page 3: ...IntelliGuard 8000 299 3 ...
Page 5: ...IntelliGuard 8000 299 5 ...
