Clifford IntelliGuard 8000, Installation Manual

Page: 13 / 18

User-Programmable Features
User-Programmable Features (1 Chirp = OFF, 2 Chirps = ON)
Fea ture
Select
Unmarked 1 Unmarked 2 Unmarked 3 Unmarked 4
✱
1
AutoProgram New Master
Remote
NOTE 1
Chirps
(Off/LoudChirps/QuietChirps)
(1 chirp/2 chirps/3 chirps)
AutoArming
(Off/On)
Arm/Disarm with
Secondary Remote
NOTE 5
✱
2
Personalized Siren Sounds
NOTE 2
NOT USED
AutoArm & Lock
(Off/On)
Trunk Release with
Secondary Remote
NOTE 6
✱
3
Play Siren Sounds
(Always/Trigger Only)
(1 chirp/2 chirps)
Remote Valet Feature
(Off/On)
En try De lay
(Off/On)
Silent Arm/Disarm with
Secondary Remote
NOTE 6
✱
4
Siren Duration
(30/60/90 Seconds)
(1 chirp/2 chirps/3 chirps)
AutoStart
(Neither/Battery/Temperature/Both)
(1 chirp/2 chirps/3 chirps/4 chirps)
Requires optional Intellistart 4
FACT
(Off/On)
Parking Lot Highlight
Activation with Secondary
Remote
NOTE 6
✱
5
AutoLock
(Off/Instant/RPM-Dependent)
(1 chirp/2 chirps/3 chirps)
BlackJax
(Off/On)
NOT USED
Remote Start** with
Secondary Remote
NOTE 6
✱
6
AutoUnlock
(Off/On)
Clear All Remotes
NOTE 4
NOT USED
Window Rolldown/Venting
with Secondary Remote
NOTE 6
✱
7
Re set All to Fac tory Set tings
(ex cept re mote controls and
valet code)
NOTE 3
Valet Code
SHOULD ONLY BE
PROGRAMMED BY THE VEHICLE
OWNER
NOT USED
Remote Valet Mode
with Secondary Remote
NOTE 6
n NOTE 1:
Press button 1 on the 16-channel master remote, you will hear one chirp. Press button 1 again , you will hear two
chirps.
n NOTE 2:
When this feature is selected, siren sound 1 will play for five seconds. Press marked to turn the siren sound off,
press unmarked to activate the sound. Next, siren sound 2 will play for five seconds. Press marked to turn the siren sound
off, unmarked to activate it. The system will cycle through all six siren sounds.
n n
NOTE 3:
You will hear two chirps when all features are reset.
n NOTE 4:
When you hear two chirps, all remote controls will have been erased from the system memory. You must now add
the new and/or existing remote controls to the system (i.e., AutoProgram each remote that will be used with the
IntelliGuard 8000).
n NOTE 5:
Programs a 4-channel secondary, 16-channel master, or any other remote control from another IntelliGuard
system to arm or disarm the vehicle. For instance, to set button 13 of the other car’s master remote control to arm/disarm
the system, select column 4, row 1, then transmit channel 13 from the remote you are programming. The system will
respond with one chirp. Immediately transmit channel 13 again. The system will respond with two chirps. Button 13 of the
other vehicle’s remote will now arm/disarm the system.
n NOTE 6:
This feature can be programmed onto the remote control of another IntelliGuard system, after that remote has
been programmed to arm/disarm this system. Select the row and column number, then transmit the unused button on the
other remote that you want to use to perform that function. The IntelliGuard 8000 will respond with the same number of
chirps as the row number. Please note that you must first set a button on the remote that will arm/disarm the system
(column 4, row 1) before these others will be accepted.
In tel liGuard 8000/299
13