background image

29

© 2013 Directed. All rights reserved.

Feature Details

29

Remote Start Features

Key Takeover

When you are ready to drive
The system keeps the engine running until the vehicle is ready to be 
driven. To perform Key Takeover:
1. 

Unlock

 the system and 

enter

 the vehicle, do not step on the foot 

brake.

2. 

Insert

 the key, 

turn

 it to the run position, and then 

step

 on the foot 

brake, the remote start then turns off. 

3.  The parking lights turn off to indicate remote start is off, and then 

after a few seconds the remote plays the 

REMOTE START OFF

 mes-

sage. The vehicle is ready to drive.

Remote Start Safe-lock

Remote start safe-lock makes sure the doors are locked while the en-
gine is running and after, even if they are unlocked when remote start 
is activated. Door locks may require additional parts and labor.

Disabling Remote Start

Remote start can be disabled by moving the Toggle Switch to the Off 
position. If remote start is attempted while Off, the engine will not start. 
(See 

Remote Start Error 

under

 Remote Start Features

) move the switch 

back to the On position to resume normal operation.

Advanced Start

The Advanced start features Timer Mode and Smart Start will automat-
ically start the engine to maintain battery charge or combat extreme 
cold when parked for an extended period of time. 
 

Summary of Contents for 4706X Responder LC3


























































Reviews: