manualshive.com logo in svg

Clifford 4706X Responder LC3, Owner'S Manual

The Clifford 4706X Responder LC3 delivers top-notch vehicle security and remote start functionality. To make the most of this exceptional product, ensure you have the Owner's Manual. Download it free of charge from manualshive.com to access detailed instructions and unleash the full potential of your Clifford 4706X Responder LC3.

Share
Download
background image

52

© 2013 Directed. All rights reserved.

52

OPERATION OF THE REMOTE START MODULE IF THE VEHICLE STARTS IN 
GEAR IS CONTRARY TO ITS INTENDED MODE OF OPERATION. OPER-
ATING THE REMOTE START SYSTEM UNDER THESE CONDITIONS MAY 
RESULT IN PROPERTY DAMAGE OR PERSONAL INJURY. YOU MUST IMME-
DIATELY CEASE THE USE OF THE UNIT AND SEEK THE ASSISTANCE OF 
AN AUTHORIZED Directed DEALER TO REPAIR OR DISCONNECT THE IN-
STALLED REMOTE START MODULE. DIRECTED WILL NOT BE HELD RESPON-
SIBLE OR PAY FOR INSTALLATION OR REINSTALLATION COSTS.

This product is designed for fuel injected vehicles only. Use of this 
product in a standard transmission vehicle must be in strict accordance 
with this guide.

This product should not be installed in any convertible vehicles, soft or 
hard top with a manual transmission. Installation in such vehicles may 
pose certain risk.

Interference

All radio devices are subject to interference which could affect proper 
performance.

Upgrades and Batteries

Any upgrades to this product and/or installation of batteries must be
performed by an authorized dealer. Do not attempt to perform any
unauthorized modifications to this product.

Water/Heat Resistance

This product is not designed to be water and/or heat-resistant. Please 
take care to keep this product dry and away from heat sources. Any
damage from water or heat will void the warranty.

Summary of Contents for 4706X Responder LC3


























































Reviews:

No comments

Related manuals for 4706X Responder LC3

Clifford 520.4X Owner'S Manual preview
520.4X
Brand: Clifford Pages: 53
MTI FREEDOM MICRO II Product Manual preview
FREEDOM MICRO II
Brand: MTI Pages: 11
NATURE & DECOUVERTES ORA Manual preview
ORA
Brand: NATURE & DECOUVERTES Pages: 9
Ebode eSD18 User Manual preview
eSD18
Brand: Ebode Pages: 36
Geemarc Viso 50 User Manual preview
Viso 50
Brand: Geemarc Pages: 2
Audiovox AX-200 Owner'S Manual preview
AX-200
Brand: Audiovox Pages: 8
Soundcore Wakey User Manual preview
Wakey
Brand: Soundcore Pages: 117
Ambient Weather WS-8460 User Manual preview
WS-8460
Brand: Ambient Weather Pages: 17
capello CR25 User Manual preview
CR25
Brand: capello Pages: 20
SCS Sentinel DAAF-10Y-CE Installation And Use Instruction preview
DAAF-10Y-CE
Brand: SCS Sentinel Pages: 24
iHudyat HYS001 Owner'S Manual preview
HYS001
Brand: iHudyat Pages: 2
Viking VS 525 Operating Instructions preview
VS 525
Brand: Viking Pages: 4
Johnson SVD075 Instructions For Use Manual preview
SVD075
Brand: Johnson Pages: 16
La Crosse Technology Radio-Controlled Travel Alarm Clock WT-2160 Instruction Manual preview
Radio-Controlled Travel Alarm Clock WT-2160
Brand: La Crosse Technology Pages: 18
Prestige APS25Z Installation And Reference Manual preview
APS25Z
Brand: Prestige Pages: 15
Defender CD8180 Quick Start Manual preview
CD8180
Brand: Defender Pages: 5
Clas Ohlson 36-5333 Manual preview
36-5333
Brand: Clas Ohlson Pages: 36
Prestige Prestige Platinum APS-510C Owner'S Manual preview
Prestige Platinum APS-510C
Brand: Prestige Pages: 16

Brands by name

Popular brands

Load more brands