Clevo W251HNQ, Service Manual

Page: 38 / 103

Disassembly
2 - 14 Removing the 3.75G Module
2.Disassembly
Removing the 3.75G Module
1. Turn off the computer, turn it over, and remove the battery ( page 2 - 5 ) and the component bay cover ( page 2 - 9 ).
2. The 3.75G module will be visible at point on the mainboard ( Figure 10a ).
3. Carefully disconnect the cable , and then remove the screw ( Figure 10b )
.
4. The 3.75G module ( Figure 10c ) will pop-up, and you can remove it from the computer ( Figure 10d ).
Figure 10
3G Module Removal
a. Locate the 3.75G mod-
ule.
b. Disconnect the cable
and remove the screw.
c. The module will pop-up.
d. Remove the 3.75G mod-
ule.
Note: Make sure you
reconnect the antenna
cable to socket.
1
2 3
4
b.
c.
a.
3
2
4
d.
4
1
a.

4. 3.75G Module
• 1 Screw