Clevo W150DAQ, Service Manual

Page: 36 / 101

Disassembly
2 - 12 Removing and Installing a Processor
2.Disassembly
4. Carefully lift up the heat sink ( Figure 7c ) off the computer.
5. Turn the release latch towards the unlock symbol , to release the CPU ( Figure 7d ).
6. Carefully (it may be hot) lift the CPU up out of the socket ( Figure 7e ).
7. See page 2 - 13 for information on inserting a new CPU.
8. When re-inserting the CPU, pay careful attention to the pin alignment, it will fit only one way (DO NOT FORCE IT!).
B
C
D
Figure 7
Processor Removal
(cont’d)
c. Remove the heat sink.
d. Turn the release latch to
unlock the CPU.
e. Lift the CPU out of the
socket.
d.
e. c.
B
Unlock
D
C

B. Heat Sink
D. CPU

Caution
The heat sink, and CPU
area in general, contains
parts which are subject to
high temperatures. Allow
the area time to cool be-
fore removing these parts.