Clevo W150DAQ, Service Manual

Page: 40 / 101

Disassembly
2 - 16 Removing the Keyboard
2.Disassembly
Removing the Keyboard
1. Turn off the computer, and remove the battery ( page 2 - 5 ).
2. Remove screws
-
from the bottom of the computer. Press at point to unsnap the LED cover module (you
will need to use Pin Eject Tool to do this Figure 11 a ).
3. Turn the computer over, unsnap up the LED cover module from point on the left of the computer, towards the
right ( Figure 11 b ).
4. Remove screws - from the keyboard ( Figure 11c ).
5. Carefully lift the keyboard up, being careful not to bend the keyboard ribbon cable . Disconnect the keyboard
ribbon cable from the locking collar socket ( Figure 11d )
6. Carefully lift up the keyboard ( Figure 11e ) off the computer.
Figure 11
Keyboard Removal
a. Remove screws from the
bottom of the computer.
b. Turn the computer over,
unsnap up the LED cov-
er module from point
towards the right .
c. Remove screws from
the keyboard.
d. Carefully lift the key-
board up and disconnect
the keyboard ribbon ca-
ble from the locking col-
lar socket.
e. Remove the keyboard.
5
1 2 3
4
5
6 10
11
11 12
13

Re-Inserting the
Keyboard
When re-inserting the
keyboard firstly align the
four keyboard tabs ( Fig-
ure 11e ) at the bottom of
the keyboard with the
slots in the case.
a.
b.
Keyboard Tabs
d.
c.
e.
1 2
3
8
6
4
5
7 9
13
11
12
13
10

4. LED Cover Module
13. Keyboard
• 7 Screws