Clevo W130HU, Service Manual

Page: 36 / 100

Disassembly
2 - 10 Removing and Installing a Processor
2.Disassembly
Removing and Installing a Processor
Processor Removal Procedure
1. Turn off the computer, turn it over, and remove the battery ( page 2 - 5 ) and the component bay cover ( page 2 - 9 ).
2. The CPU heat sink will be visible at point ( Figure 6a ).
3. Loosen the CPU heat sink screws in the order , & (the reverse order as indicated on the label Figure 6b ).
4. Grip the heat sink tab and carefully raise the heat sink up to an angle of around 30° and lift it up off the com-
puter ( Figure 6c ).
A
3
2
1
4
5
Figure 6
Processor Removal
a. The CPU heat sink will
be visible at point .
b. Remove the screws from
the CPU heatsink.
c. Grip the heat sink tab
and carefully lift the heat
sink up and off the com-
puter.
A

5. Heat Sink
• 3 Screws
a.
b.
1
2
3
A
c.
5
4