Clevo W130HU, Service Manual

Page: 32 / 100

Disassembly
2 - 6 Removing and Installing the Hard Disk Drive
2.Disassembly
Removing and Installing the Hard Disk Drive
Hdd Removal Procedure
The hard disk drive can be taken out to accommodate other 2.5" serial (SATA) hard disk drives with a height of 9.5mm
(h). Follow your operating system’s installation instructions, and install all necessary drivers and utilities (as outlined in
Chapter 4 of the User’s Manual ) when setting up a new hard disk.
Hard Disk Upgrade Process
1. Turn off the computer, and remove the battery ( page 2 - 5 ).
2. Slide the latch in the direction of the arrow and slide the latch in the direction of the arrow, and hold it in
place and carefully slide the cover in the direction of the arrow to align with the markers on the case .
3. Lift the component bay cover off the computer.
4. When reinserting the cover align the markers on the case and cover first, and then slide the cover until it clicks
into place.
Figure 2
HDD Assembly
Removal
a. Slide the latches and
atch hold it in place.
b. Remove the component
bay cover.
2

HDD System Warning
New HDD’s are blank.
Before you begin make
sure:
You have backed up
any data you want to
keep from your old
HDD.
You have all the CD-
ROMs and FDDs re-
quired to install your op-
erating system and
programs.
If you have access to
the internet, download
the latest application
and hardware driver up-
dates for the operating
system you plan to in-
stall. Copy these to a re-
movable medium.
1 2
3 4
6
5
4
2 1
3
4 4
b. a.
5

5. Component Bay Cover