Clevo P6x0Hx User Manual Download Page 81

Page: 81 / 368

Power Options 1 - 45

Quick Start Guide

Power Options

Power Options (Hardware and Sound)

can be accessed from the Control Panel. The

Power

button item in

Start Menu

(or the context menu) may be used to

Shut down

Restart

(you can also add

Hibernate/Sleep

the menu - see page

1 - 46

). To fully control all the power options (including Hibernate mode) go to the

Power

Options

control panel and configure the power button, sleep button and lid to perform the function selected.

Figure 1 - 34

- Shut Down/Restart

Using the Power Button

Go to the

Start Menu

Click the

Power button

Select the power state required
from the menu.

Summary of Contents for P6x0Hx

















































































































































































































































































































































































Search results

Summary of Contents for P6x0Hx

Reviews:

Clevo P6x0Hx, User Manual, Page: 81 / 368

Search results

Summary of Contents for P6x0Hx

Reviews: