Clevo P6x0Hx User Manual Download Page 350

Page: 350 / 368

Video Driver Controls

C - 40 Intel® HD Graphics Control Panel

Click the

Display

menu at the top of the screen to display the sub-menus. The

Mul-

tiple Displays

menu allows you to configure the display mode of any attached dis-

plays (see

“Attaching Other Displays - Intel HDGCP” on page C - 49

). Click

Apply

to save any changes made.



Multiple Display

At least one other dis-
play must be attached in
order to view multiple
display

selection op-

tions.

Audio Settings

Any attached active dis-
plays must have audio
capacity to allow audio
configuration.

Figure C - 30

Intel® HD Graphics

Control Panel

Display - Multiple

Displays

Summary of Contents for P6x0Hx

















































































































































































































































































































































































Search results

Summary of Contents for P6x0Hx

Reviews:

Clevo P6x0Hx, User Manual, Page: 350 / 368

Search results

Summary of Contents for P6x0Hx

Reviews: