Clevo Notebook User Manual Download Page 63

Page: 63 / 151

3 - 4

User’s Manual

Setting the Power Management functions

You can set the power management functions either in the SCU (for APM and

hard disk standby), or the operating system (for ACPI). To learn more about

what power management settings are available and how to configure them it is

best that you refer to your operating system’s user guide.

For more information on setting the hard disk standby or any other power

management functions in the SCU (for users of APM), please refer to the Power

Menu in Chapter 5.

If both the Windows OS power management settings and the SCU power man-

agement settings are configured, The Windows OS power management

settings will override those set in the SCU EXCEPT for hard disk

standby.

Summary of Contents for Notebook
























































































































































Search results

Summary of Contents for Notebook

Reviews:

Related manuals for Notebook

Brands by name

Popular brands

Clevo Notebook, User Manual

Search results

Summary of Contents for Notebook

Reviews:

Related manuals for Notebook

Brands by name

Popular brands